MD係列堆碼機將折疊好的布草通過翻板快速打開，下層輸送帶接住下落的布草，當達到預選好的數量時，輸送帶將碼堆布草送出

一位機位，從而達到計數、堆垛作用。

MD係列堆碼機采用氣缸直接驅動翻板，結構簡單，故障率小；輸送帶采用電動輥直接驅動，可在電腦上任意設置輸送步進長度，

便於調整；無需堆碼功能時，可采用旁通功能直接從側麵輸出；可兩台並列形成不同尺寸布草

堆碼；整體結構尺寸緊湊，更便於增添設備；可選配腳踏開關，更便於操作人員操作。

The MD series stacker quickly opens the folded linen through the flap, and the lower conveyor belt catches the fallen linen. When the pre-selected number is reached, the conveyor belt sends the stack of linen

One machine position for counting and stacking.

The MD series stacker uses a cylinder to directly drive the flap, which is simple in structure and has a low failure rate. The conveyor belt is directly driven by an electric roller. The step length of the conveyor can be arbitrarily set on the computer.

Easy to adjust; when the stacking function is not needed, the bypass function can be used to directly output from the side; two can be lined up to form different sizes of linen

Stacking; compact overall size, more convenient for adding equipment; optional foot switch, more convenient for operators to operate.

技術參數

Technical Specifications